SpaceLogic KNX Control unit 0-10 V REG-K/3-gang with manual mode
Interface adaptation unit for connecting 0-10 V interface devices to KNX systems, featuring manual control capability and standardized installation.
Key Features
- Facilitates connection of 0-10 V interface devices to KNX systems
- Integrated bus coupler for seamless compatibility
- 230 V screw terminals and 0-10 V plug-in screw terminals
- Independent manual control for each 230 V switch output
- DIN rail TH35 mounting (EN 60715 compliant)
- Bus connection via bus connecting terminal
KNX Software Functions
- Configurable dimming curves and speeds
- Memory function with ON/OFF delay
- Staircase time function with manual OFF option
- Scene control (8 stored brightness values)
- Central function with logic operation
- Priority control and blocking function
- Status feedback and bus voltage recovery behavior
Technical Specifications
Switch Contact |
For electronic ballasts/transformers |
Nominal Voltage |
AC 230 V, 50-60 Hz |
Nominal Current |
16 A, cosϕ = 0.6 |
Switching Capacity |
AC 230 V, 3600 W, cosϕ = 1 |
Capacitive Load |
AC 230 V, 16 A, 200 µF |
Incandescent Lamps |
AC 230 V, max. 3600 W |
Halogen Lamps |
AC 230 V, max. 2500 W |
Fluorescent Lamps |
AC 230 V, max. 3600 VA (uncompensated)
AC 230 V, max. 2500 VA (parallel compensation) |
LV-Halogen Lamps |
Max. 2000 VA (with wound transformer) |
0-10 V Interface |
0.12-100 mA |
Voltage Range |
DC 0-10 V |
Device Width |
4 HP (approx. 72 mm) |
Contents |
Includes bus connecting terminal and cable cover |